Supported Sensors
Overview
The Humly connector consumes Haltian IoT sensor measurements and converts them into Humly sensor readings. It maps a small, fixed list of measurement types to Humly sensor types - it does not have a concept of per-device or per-sensor configuration presets.
This page lists the Haltian sensors that emit supported measurement types today, what each sensor reports, and how that data appears in Humly.
Measurement Type Mapping
The connector maps the following Haltian measurement types to Humly sensor types:
| Haltian measurement type | Humly sensor type | Unit |
|---|---|---|
ambient_temperature, system_temperature | temperature | °C |
humidity | relativeHumidity | % |
barometric_pressure | pressure | - |
co2 | co2 | ppm |
occupancy_status, movement_detections, directional_movement | motion | - |
presence | presence | - |
Any measurement type not in this list is skipped and never sent to Humly.
Sensor Summary
| Sensor | Detection | Occupancy Data | Best For |
|---|---|---|---|
| Thingsee PRESENCE | Passive Infrared (PIR) | presence / occupancy_status → Humly presence / motion | Desks, small rooms |
| Haltian ENTRYWAY | Patented 3-PIR directional | directional_movement → Humly motion | Doorways, meeting rooms |
| Haltian RADAR | 60 GHz pulsed coherent radar | occupancy_status → Humly motion | Parking spaces, loading docks |
| Thingsee AIR | CO₂, temperature, humidity, pressure | Indirect (CO₂ as occupancy proxy) | Room air quality, comfort |
| Thingsee ENVIRONMENT | Temperature, humidity, pressure, light, magnetic switch | Indirect | Environmental context alongside occupancy |
Sensor Details
Thingsee PRESENCE
The Thingsee PRESENCE reports occupancy status and presence. When a device sends presence or occupancy_status measurements, the connector forwards them to Humly as a presence or motion sensor reading.
Haltian ENTRYWAY
The Haltian ENTRYWAY reports directional movement (entries and exits). Its directional_movement measurements are forwarded to Humly as motion readings.
Haltian RADAR
The Haltian RADAR reports binary occupied/vacant status via occupancy_status measurements, forwarded to Humly as motion readings.
Thingsee AIR
The Thingsee AIR reports ambient_temperature, humidity, barometric_pressure, and co2. Each of these measurement types is mapped and forwarded individually to Humly as temperature, relativeHumidity, pressure, and co2 sensor readings, respectively. CO₂ readings can also serve as an indirect occupancy signal in Humly, since CO₂ levels tend to rise with the number of people in a closed space.
Thingsee ENVIRONMENT
The Thingsee ENVIRONMENT reports ambient_temperature, humidity, and barometric_pressure among its measurements. These are mapped and forwarded to Humly the same way as Thingsee AIR’s climate measurements.
How Sensors Appear in Humly
The connector auto-creates a sensor in Humly the first time it receives a supported measurement type from a device - for example, a sensor identified as HIoT-ambient_temperature-hiot-dev. Newly created sensors appear unassigned in Humly.
Mapping an unassigned sensor to a specific Humly room or desk is done inside Humly’s own Control Panel UI - the Haltian side does not provide a device-to-room mapping step. No report describes an alternative mapping mechanism, so treat this as the only confirmed path.
Selection Guide
| You want to send to Humly | Use this sensor |
|---|---|
| Room or desk occupancy (motion/presence) | Thingsee PRESENCE |
| Entry/exit or directional movement | Haltian ENTRYWAY |
| Outdoor or harsh-environment occupancy (e.g., parking) | Haltian RADAR |
| Temperature, humidity, pressure, CO₂ | Thingsee AIR |
| Temperature, humidity, pressure (with additional environmental context) | Thingsee ENVIRONMENT |
Next Steps
- Integration Guide - Set up the Humly connection
- FAQ - Common questions about sensors, mapping, and data flow