Specifications

Complete technical specifications for Haltian ENTRYWAY sensor

General Specifications

Product Information

Specification	Value
Product name	Haltian ENTRYWAY
Model	ENTRYWAY
Manufacturer	Haltian Oy
Use case	People counting for doorways and passages
Technology	Patented 3-PIR (Passive Infrared) sensors

Physical Specifications

Dimensions and Weight

Specification	Value
Length	110 mm (approximate)
Width	65 mm (approximate)
Height	35 mm (approximate)
Weight	166 grams (with batteries)
Mounting	Doorframe, ceiling, wall (multiple methods)

Enclosure

Specification	Value
Material	Plastic housing
Color	White/light gray (typically)
IP rating	Not IP-rated (indoor use only)
Environmental protection	Standard indoor enclosure

Environmental Suitability

Indoor use only:

Not waterproof or dustproof
Designed for typical indoor office/retail environments
Avoid outdoor installation or exposure to moisture

PIR Sensor Specifications

3-PIR Sensor Technology

Specification	Value
Sensor type	Passive Infrared (PIR) × 3
Technology	Patented triple-PIR configuration
Detection method	Thermal (heat signature)
Directional capability	Yes (distinguishes entry vs. exit)

Detection Coverage

Specification	Value
Maximum passageway width	1600mm (1.6 meters)
Maximum passageway height	2800mm (2.8 meters)
Recommended installation height	2500mm from floor
Detection zones	3 parallel PIR beams across passageway

Detection Capabilities

Capability	Value
Output	Directional count (entries and exits)
Counting accuracy	> 95% (single-file traffic, optimal conditions)
Simultaneous passage	Limited (side-by-side may cause errors)
Thermal sensitivity	Detects heat sources ~36-37°C (body temperature)
Anonymous detection	100% (no cameras, no personal identification)

Thermal Detection Requirements

Optimal conditions:

Ambient temperature: 15-25°C (59-77°F)
Body temperature: ~36-37°C (97-99°F)
Temperature difference: ~15-20°C (sufficient thermal contrast)

Reduced accuracy:

High ambient temperature (> 30°C): Less thermal contrast
Cold individuals (winter clothing, just entered from outdoors)
Insufficient temperature gradient between body and environment

Battery Specifications

Battery Type

Specification	Value
Chemistry	2× AA alkaline batteries
Voltage	3V nominal (1.5V × 2)
Capacity	2000-3000 mAh per AA (varies by brand)
Replaceability	User-replaceable
Expected lifespan	Up to 4 years (typical usage)

Battery Life Estimates

Based on configuration:

Configuration	Measurement Interval	Idle Reporting	Expected Battery Life
Low-latency	10 seconds	10 minutes	~2 years
Standard (default)	30 seconds	1 hour	~4 years
Low-power	60 seconds	24 hours	~5 years
Heavy router usage	(Varies - relaying packets)	(Varies)	3-4 years

Factors affecting battery life:

Measurement frequency (more measurements = faster drain)
Transmission frequency (more reports = faster drain)
Mesh network role (routers relay packets, consume more power)
Environmental temperature (cold reduces capacity)

Replaceable Batteries

Unlike non-replaceable battery sensors, ENTRYWAY batteries are easily user-replaceable (2× AA alkaline). Simply open battery compartment, swap batteries, and sensor resumes operation automatically.

Communication Specifications

Wireless Technology

Specification	Value
Protocol	Wirepas Massive (mesh networking)
Frequency	2.4 GHz ISM band
Range	Up to 20 meters (node-to-node or node-to-gateway)
Topology	Self-organizing mesh network
Encryption	AES-128 encryption
Radio sensitivity	-95 dBm (BTLE)

Network Characteristics

Feature	Details
Mesh routing	Automatic multi-hop routing
Self-healing	Network adapts if nodes fail
Scalability	Supports thousands of nodes per network
Latency	Seconds to minutes (typical)
Gateway requirement	Yes (Thingsee Gateway or compatible)

Data Transmission

Payload structure (example):

{
  "measurementDirectionalMovement": [
    {
      "deviceId": "df1b0c93-60a2-4cc9-8646-762fc1d2d42e",
      "entries": 3,
      "exits": 2,
      "measuredAt": "2025-01-14T10:30:00.714+00:00"
    }
  ]
}

Transmission behavior:

First detection: Report immediately (within 1-5 minutes)
Active period: Report every 30 seconds (default) during activity
Idle period: Report every 1 hour (default) when no movement
Battery optimized: Minimal transmissions when no traffic

Environmental Specifications

Operating Temperature Range

Specification	Value
Minimum	0°C (32°F)
Maximum	+50°C (122°F)
Optimal	15-25°C (59-77°F) for best PIR detection
Storage temperature	0°C to +50°C

Temperature effects:

PIR performance: Reduced accuracy when ambient temp close to body temp (> 30°C)
Battery capacity: Reduced in extreme cold (< 10°C) or heat (> 40°C)
Housing integrity: Standard plastic suitable for indoor 0-50°C range

Humidity and Moisture

Specification	Value
Operating humidity	8% to 90% RH (non-condensing)
Condensation tolerance	No (avoid condensing environments)
Storage humidity	8% to 90% RH (non-condensing)

Real-world scenarios:

Indoor offices: Excellent (typical 40-60% RH)
Underground parking: Acceptable (may approach 90% RH, ensure non-condensing)
Outdoor: Not suitable (ENTRYWAY is indoor-only)

Altitude and Pressure

Specification	Value
Operating altitude	0 to 3,000 meters (0 to ~10,000 feet)
Atmospheric pressure	Standard atmospheric pressure (typical indoor environments)

Measurement and Reporting

Measurement Parameters

Parameter	Default	Range
Measurement interval (active)	30 seconds	10s - 60s (typical)
Reporting interval (idle)	1 hour	10 minutes - 24 hours
First detection	Immediate	(Fixed)

Data Accuracy

Metric	Value
Counting accuracy (single-file)	> 95% (optimal conditions)
Counting accuracy (moderate traffic)	> 90% (1-2 people per minute)
Counting accuracy (busy traffic)	80-90% (> 5 per minute, some simultaneous)
Directional accuracy	> 95% (complete passage through all 3 PIR beams)

Accuracy depends on:

Single-file traffic (side-by-side passage reduces accuracy)
Complete passage (person walks through all three PIR beams)
Sufficient temperature difference (ambient 15-25°C ideal)
Passageway width ≤ 1600mm

Certifications and Compliance

Regulatory Certifications

Certification	Status
CE	✅ Certified (European conformity)
RCM	✅ Certified (Australia/New Zealand)
UKCA	✅ Certified (United Kingdom)
FCC	(Check with Haltian for latest status)
IC	(Check with Haltian for latest status)

Standards Compliance

Standard	Compliance
RoHS	✅ Compliant (Restriction of Hazardous Substances)
REACH	✅ Compliant (EU chemical regulation)
WEEE	✅ Compliant (Waste Electrical and Electronic Equipment)

Laser Safety

Specification	Value
Laser class	Class 1 laser
Safety level	Safe under all conditions of normal use
Regulatory standard	IEC 60825-1 (laser safety)

Class 1 Laser Safety

Class 1 lasers are safe for use without special precautions. The laser emissions are well below levels that could cause eye or skin damage during normal operation.

Radio Compliance

Regulation	Details
2.4GHz Wirepas	ISM band, unlicensed operation globally
Emission limits	Complies with regional limits (CE, RCM, UKCA)
SAR	Not applicable (sensor, not body-worn)

Use Case Specifications

Visitor Counting (Offices, Retail)

Specification	Value
Typical passageway width	800-1600mm (doorways, corridors)
Detection speed	30 seconds (default interval)
Traffic type	Single-file, moderate traffic
Accuracy	> 95% (properly configured)
Installation height	2500mm (doorframe or ceiling)
Mounting location	Top of doorframe, ceiling, or wall

Visitor counting features:

Directional count (entries vs. exits)
Anonymous detection (privacy-compliant)
4-year battery life (minimal maintenance)

Utilization Monitoring (Meeting Rooms, Spaces)

Specification	Value
Typical passageway width	800-1200mm (meeting room doors)
Detection speed	30 seconds (default)
Traffic type	Low-moderate traffic
Accuracy	> 95% (single-file)
Installation height	2500mm (doorframe)
Mounting location	Top of doorframe (opposite door swing)

Utilization monitoring features:

Entry/exit counts for occupancy estimation
Integration with room booking systems
Low maintenance (4-year battery, replaceable)

Packaging and Accessories

Package Contents

Typical package includes:

1× Haltian ENTRYWAY sensor (with 2× AA batteries pre-installed)
1× C-cover (mounting bracket)
1× Mounting tape (double-sided adhesive)
2× Screws
2× Screw anchors (for concrete/brick)
1× Installation guide (quick start)

Not included (typically):

Additional mounting hardware (site-specific)
Thingsee Gateway (sold separately)
Haltian IoT Studio access (subscription-based)

Optional Accessories

Available from Haltian or suppliers:

Additional mounting brackets (for specific installations)
Replacement batteries (2× AA alkaline, standard off-the-shelf)
Extended warranty (beyond standard)
Bulk deployment kits (for large installations)

Comparison to Alternative Technologies

ENTRYWAY vs. Other People Counting Sensors

Technology	Privacy	Indoor/Outdoor	Battery Life	Accuracy (Single)	Accuracy (Simultaneous)	Cost
3-PIR (ENTRYWAY)	✅ 100% anonymous	✅ Indoor only	4 years	> 95%	Limited	$$
Time-of-Flight (ToF)	✅ Anonymous	✅ Both	3-5 years	> 95%	Good	$$$
Thermal camera	✅ Anonymous (heat only)	✅ Both	Wired/solar	> 95%	Excellent	$$$$
Video camera + AI	❌ Identifies people	✅ Both (housing)	Wired/solar	> 99%	Excellent	$$$$$
Break-beam sensor	✅ Anonymous	✅ Both	5+ years	> 90%	Poor (occlusion)	$

3-PIR (ENTRYWAY) advantages:

100% anonymous (privacy-first)
Low cost (compared to ToF, thermal, video)
Long battery life (4 years, replaceable)
Easy installation (doorframe, ceiling, wall)
Directional counting (entries vs. exits)

3-PIR trade-offs:

Indoor use only (not IP-rated)
Limited simultaneous passage detection (side-by-side may cause errors)
Requires sufficient temperature difference (thermal detection)
Passageway width limited to 1600mm

Technical Support and Documentation

Available Documentation

Installation guide: Included with sensor
Operation manual: Available online (support.haltian.com)
API documentation: For integration developers
Knowledge base: support.haltian.com

Support Contacts

For technical specifications questions:

Email: support@haltian.com
Documentation: https://support.haltian.com
Sales inquiries: sales@haltian.com

Warranty and Lifecycle

Warranty

Item	Coverage
Standard warranty	2 years (hardware defects)
Extended warranty	Available (contact Haltian)
Battery warranty	Not typically covered (user-replaceable consumable)
Coverage	Manufacturing defects, hardware failures

Not covered:

Physical damage from mishandling
Water damage (not IP-rated, indoor use only)
Battery depletion (user-replaceable, not a warranty issue)
Environmental damage beyond specifications (0-50°C, 8-90% RH)

Product Lifecycle

Phase	Timeline
Active use	Indefinite (batteries replaceable)
Battery replacement	Every ~4 years (user-serviceable)
End of life	Hardware failure or obsolescence (not battery-dependent)
Disposal	Follow WEEE regulations (electronics recycling)
Replacement	Deploy new sensor if hardware fails, update IoT Studio configuration

Long-term maintenance:

Replace batteries every ~4 years (or when battery < 10%)
Sensor hardware lifespan typically 10+ years (if well-maintained)
Budget for battery replacements, not full sensor replacements

Device Components

Sensor Device

Main components:

3-PIR sensor array: Three Passive Infrared sensors (beam windows)
LED indicator: Status indication (check documentation for LED patterns)
Power button: On/off, reset (refer to user manual)
Battery compartment: 2× AA batteries (user-accessible)

C-Cover (Mounting Bracket)

Mounting interface:

Attaches sensor to doorframe, ceiling, or wall
Screw mounting holes (for permanent installation)
Tape mounting surface (for semi-permanent installation)
Included with sensor package

Specification Change Notice

Specifications subject to change:

Haltian reserves the right to update specifications
Significant changes communicated to customers
Check support.haltian.com for latest specifications

Document version: Refer to support.haltian.com for most current specifications.

For complete and up-to-date specifications, visit: https://support.haltian.com